 |
|
|
|
 |
 |
|
|
|
| Full technical information on Alcan materials. Also, explanations of product colour & design options, environmental & maintanence awareness and its reliability. |
|
|
|
|
|
|
|
|
|
|
|
|
Falzonal prepainted aluminium from Alcan in lock-welt quality is a semi-finished product available in strips (coils) or sheets which have been coil coated in colour with PVDF (polyvinylidene fluoride) in a ratio of 80/20. The alloy, mechanical properties and coating materials have all been specially tailored for further processing using lock-welt technology.
|
|
|
|
|
| Coating: |
|
Front face (exposed side): 2-layer system (primer and top coat applied using coil-coating process).
Paint-system: PVDF (polyvinylidene fluoride).
A number of special colour tones are applied in 3 or even 4 layers.
Reverse face: transparent protective lacquer with printed identification No. and ALCAN symbol. An arrow indicates the direction of coating. |
|
|
|
|
|
Coating
Thickness : |
|
Face side: approx. 25 µm.
Reverse side:
approx. 3 µm |
|
|
| Gloss: |
|
Approx. 20 units based
on the Gardner measuring system, measuring angle 60° metallic colours with approx 40 units. |
|
|
Colour
Range: |
|
Colours as per current Alcan colour chart, with various special colour developments such as simulated zinc or special colours and special customized tones
1,500 m2 |
|
|
Quality
Checks: |
|
Compliant with all relevant European standards such as DIN, ASTM, BS, EN, ISO 9001 und ECCA••). |
|
|
| Recycling: |
|
Falzonal prepainted aluminium can be
recycled without problem and without any loss
of quality.
Approx. 95 % of Falzonal prepainted aluminium is won from
recycled aluminium. |
|
|
|
Speak To Us For More Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alcan prepainted aluminium FF2 and FF2 plus are semi-finished aluminium products in strip or panel form which have been coil-coated with high-quality PVdF (polyvinyl flouride) paints. Alloys, mechanical properties and coating materials have been carefully geared to the needs of facade cladding.
|
|
|
|
|
| Linear Expansion: |
|
Coefficient of linear expansion 0.024mm/m/¾C |
|
|
|
|
|
| Elasticity: |
|
Modulas of elasticity -70,000 MPa |
|
|
| Coating Thickness: |
|
Front face approx. 25 µm, metallics up to 40 µm, reverse face approx. 3 µm |
|
|
|
| Speak To Us For More Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FF3 is a solid prepainted aluminium sheet, especially developed for architectural claddings. Architects, specifiers and owners are provided with a vast range of high quality design options. For the first time an extrema dimension of 3,0 x 2000 x 8000 mm as a pre-painted sheet is possible.
|
|
|
| Application: |
|
Architectural claddings for refurbishments and new constructions for residential and office buildings, airports, high
rise buildings, etc. |
|
|
|
|
|
| Alloy: |
|
ALCAN WG 53 S,
EN AW 5754 (AIMg3) to
EN 573-3, AA 5754 to international designation. |
|
|
|
Dimen-
sions: |
|
Panels in standard dimensions
Thickness: 3,0 mm
(also 2,5 mm)
Width: up to 2000 mm
Length: up to 8000 mm |
|
|
Paint
Surface |
|
PVdF (Kynar 500/
Hylar 5000, 80/20),
with protective film. |
|
|
|
|
|
Mech.
Properties: |
|
Temper: H 42 to EN 1396
Tensile Strength:
Rm 220 – 260 Mpa
Proof stress:
Rp 0,2, 165– 200 Mpa
Elongation: A 50 > 9 %
Permissible load:
96 Mpa to DIN 4113 |
|
|
Linear
Expansion: |
|
Coefficient of linear expansion 0.024 mm/m/°C |
|
|
| Elasticity: |
|
Modulus of elasticity –70,000 Mpa |
|
|
Fire
Protection: |
|
FF3 is non-combustable to DIN 4102-A2, test symbol PA-III 4.592.
Smoke gases comply with DIN 4102 and pose no threat to health. |
|
|
|
|
Coating
Thickness: |
|
Front face: approx. 25 µm, metallics up to 40 µm,
reverse face: approx. 3 µm |
|
|
| Gloss: |
|
Approx. 20 units as per
the Gardner measuring system, measuring
angle 60°.
Metallic colours approx.
40 units. |
|
|
| Colours: |
|
Colours as per current Alcan colour chart and PPG colour chart, as
well as special colours developed on the basis
of RAL, NCS etc. or customer specifications. Special and customised colours available from a min. quantity of 1500 m2. |
|
|
Quality
Checks: |
|
Quality checks are based on Alcan’s factory standard, EN, DIN, ASTM and BS standards and ECCA guidelines**.
Quality assurance has been certified to ISO 9001. |
|
|
Environ.
Protection: |
|
FF3 prepainted aluminium can be recycled without problem and can be fed back into the material cycle without any loss of quality.
85 % of FF3 prepainted aluminium is produced from recycled (secondary) aluminium. |
|
|
|
|
|
|
| Speak To Us For More Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
* The strength properties of ALCAN aluminium semi-finished goods comply extensively with DIN 1396.
** ECCA: European Coil Coating Association, Brussels. The members of the ECCA undertake to maintain the consistently high quality of precoated materials and to ensure their suitability for use in the construction industry. ALCAN is a member of the ECCA. |
|
|
|
|
|
|
|
|
